Adler, la technique au service du verre Projets d'installations avec les produits d'Adler Catalogue par rayons des produits d'Adler Nouveaut�s d'Adler, la technique au service du verre
FT 8550216
EB/Upd.2-04.01.2018_
PDF
Catalogue hinges and hardware
for glass enclosures :
shower, doors...
FT844 Shower by Capsi
FT842 Showcase by Adler (fr)
FT839 Adslide
FT860 aluminium profiles by Adler VF
FT857 Shower Clip-in-door

FT853 Shower by Adler VF
FT849 Shower by Adler
All the models shown here have been designed using the following components:
High shine finish:
Chrome plated or polished stainless steel
Brushed finish:
Brushed nickel, brushed stainless steel, brushed anodised stainless steel
ADSLIDE Ellipse threshold strip with clip and seal
If the panel is larger than 1 meter add a clip
   
   
ADSLIDE section for wall mounting
Height 2m
Height 4m
Height 2m
Height 4m
Kit for U section for wall mounting :780 61N
Adler Sélection 90° Gl/Gl. clips in brass, 50 x 50 mm
505 05X (matt chromed)*
Capsi square support bar 20 x 20 mm
Height 1.40m
Height 2m
Height 1.40m
Height 2m
698 36K
698 63P
698 37L
698 64Q
+ Optional in-line panel mountings for models 3-4-5-6
The models shown here are available in a range of options to give your walk-in shower screen its own distinctive style.
Firstly, for models with return walls at 90° connected to each other with clips, various types of clip are available in different sizes, shapes and finishes. If your preference is for a rounded style of clip (the Venus model), the Adslide 25 mm-diameter cylindrical support bar may be a better match than the standard Capsi 20 x 20 mm square support bar.
When it comes to wall fixings, expert fitters won’t need to take advantage of the U section offered as standard to compensate for any errors when taking measurements, uneven wall surfaces or supporting walls that are out of plumb. In this case, affixing the glass panels to the wall with clips that match those used to join the panels at 90° offers an attractive, stylish finish. To achieve this, Adler SAS recommends the use of wall sections, ideally flat sections, to attach glass panels to walls easily and securely and ensure that your installation is watertight.


The ADLER range provides lots of other options for joining glass panels to each other at 90°: High shine finish:
Chrome plated or polished stainless steel
Brushed finish:
Brushed nickel, brushed stainless steel
CAPSI clips in aluminium bronze
Gl/Gl.90� 40x40 mm

CAPSI clips in aluminium bronze
Gl/Gl.90° 57x57 mm
+ 90° Gl/Gl adapter kit in aluminium bronze
VENUS clips in brass, height 40 mm x length 45 mm
-
Round support bar in stainless steel
+ Optional in-line panel mounting for models 3-4-5-6
Stylish wall fixings further enhance the effect of a coordinating installation : High shine finish:
Chrome plated or polished stainless steel
Brushed finish:
Brushed nickel, brushed stainless steel, brushed anodised stainless steel
Glue-and-screw wall section: pre-machined 25 x 5 mm aluminium flat section. Simply screw the clips into the section.
+ Watertight wall section in translucent silicone, length 3.50 m
790 62N
503 00Z (chrome)
503 01A (Brushed nickel)
503 33L (chrome)
503 34M (Brushed nickel)
504 01K (chrome)
504 20F (matt chromed)*
503 25B(chrome)
503 26C (Bss)
505 00S (chrome)
505 01T (matt chromed)*

* Finish is slightly different from brushed steel.

Model : 1 WALK-IN
Short name : WIC-Fg-RiN
Description  
With just one fixed screen, this model is the simplest and most cost-effective walk-in shower. It is suitable for larger spaces where the water won't splash much beyond the shower tray. Adler SAS recommends the use of a slimline U section for wall mounting, which is specially designed to compensate for any errors when taking measurements, out-of-plumb vertical supporting wall surfaces, etc., with a tolerance of +/- 12 mm. The internal-facing side of the section is in direct contact and near-flush with the glass panel. The combination of metal and glass, both proven to resist corrosion, means there is no risk of deterioration over time. The external-facing side includes a near-invisible translucent PVC section which maintains the pressure on the glass to keep it in the section. On the floor, a threshold strip ensures long-lasting performance and hygiene.
Left
WIC-Fg-RiN
Right
WIC-Fd-RiN
Glass
. Patented glass manufacturing technology that prevents surface corrosion. No specific maintenance requirements.
. Permanent protection with a lifetime warranty Hardware
Hardware
Wall sections in high shine chrome plate or anodised brushed stainless steel finish:
. Correct out-of-plumb and uneven wall surfaces;
. S�curisation des points de fixation muraux.

Model : 2 WALK-IN
Short name : WIC-Fg-RiN-R
Description  
This corner model takes advantage of layout to reduce the risk of splashing beyond the shower tray, with the supporting wall corner acting as an additional screen. Adler SAS recommends the use of a slimline U section for wall mounting, which is specially designed to compensate for any errors when taking measurements, out-of-plumb vertical supporting wall surfaces, etc., with a tolerance of +/- 12 mm. The internal-facing side of the section is in direct contact and near-flush with the glass panel. The combination of metal and glass, both proven to resist corrosion, means there is no risk of deterioration over time. The external-facing side includes a near-invisible translucent PVC section which maintains the pressure on the glass to keep it in the section. On the floor, a threshold strip ensures long-lasting performance and hygiene.
Left
WIC-Fg-RiN-R
Right
WIC-R-Fd-RiN

L = width / HV = glass height

Glass
. Patented glass manufacturing technology that prevents surface corrosion. No specific maintenance requirements.
. Permanent protection with a lifetime warranty Hardware
Hardware
Wall sections in high shine chrome plate or anodised brushed stainless steel finish:
. Correct out-of-plumb and uneven wall surfaces;
. Sécurisation des points de fixation muraux.

Model : 3 WALK-IN
Short name : WIC-R-RiN2-Fg
Description  
When it comes to layout, accessibility and speedy, reliable installation, this model offers a number of advantages over other corner models. For fitting, the two U sections that are recommended are simply inserted into the supporting walls once holes have been drilled using the sections as templates. The support bar is not affixed to the wall but screwed directly to the fixed glass panel, saving time and reducing the risk associated with fitting, and vastly improving the reliability, strength and durability of the build. The sections recommended for both walls and floors ensure secure, watertight fitting. The only seal section in contact with water, soap, etc., supports the glass panel and ensures that the threshold strip is perfectly watertight with the screen. Made of silicone, it is completely inert and does not yellow or deteriorate with age.
Left
WIC-R-RiN2
-Fg
Right
WIC-Fd-R-RiN2

Model : 4 WALK-IN
Short name : WIC-R-RiN2-pR-Fg
Description  
This model is a must for watertight corner showers and speedy, reliable installation. However, it is best used for larger shower cubicles only, for ongoing ease of access. For fitting, the two U sections that are recommended are simply inserted into the supporting walls once holes have been drilled using the sections as templates. The support bar is not affixed to the wall but screwed directly to the fixed glass panel, saving time and reducing the risk associated with fitting, and vastly improving the reliability, strength and durability of the build. The sections recommended for both walls and floors ensure a secure, watertight fit. The only seal section in contact with water, soap, etc. supports the glass panel and ensures that the threshold strip is perfectly watertight with the screen. Made of silicone, it is completely inert and does not yellow or deteriorate with age. The only other surfaces in contact with water are made of metal or glass, both treated for optimum corrosion resistance. Very low maintenance and fully hygienic.
Left
WIC-R-RiN2-pR
-Fg
Right
WIC-Fd-pR-R-RiN2

Model : 5 WALK-IN
Short name : WIM-R-RiN2-Fg-R
Description  
Where dimensions are sufficient, this wall-mounted fixed shower screen provides a watertight installation.
With a clean, sleek design, it is quick and easy to fit. The sections recommended for wall mounting compensate for uneven horizontal and vertical surfaces, with a tolerance of +/-12 mm.
Left
WIM-R-RiN2-Fg-R
Right
WIM-R-RiN2-Fd-R

 

Model : 6 WALK-IN
Short name : WIM-R-RiN2-pR-Fg-R
Description  
This wall-mounted fixed shower screen provides an effective watertight installation. To ensure comfortable, easy access, though, it is best-suited to larger installations.
With a clean, sleek design, it is quick and easy to fit. The sections recommended for wall mounting compensate for uneven horizontal and vertical surfaces, with a tolerance of +/-12 mm.
Left
WIM-R-RiN2-Fg-R
Right
WIM-R-RiN2-Fd-pR-R

Model : 7 WALK-IN
Short name : WiM-F-2RiN
Description  
One of the go-to models for fixed shower screens, recommended for use only for shower areas over 1.50 m wide, to minimise the risk of water being sprayed into the rest of the bathroom.
The glass screen is affixed as standard to three points in the floor, using an anti-corrosion metal section to ensure long-lasting mechanical strength and keep the shower watertight. Following Adler's principles for installation, nothing is screwed to the shower tray, but is glued instead.
The two support bars – square or cylindrical according to your preference, both with a sleek, pared-down design – ensure that the glass panel is properly affixed to the back wall. The strength of the build is provided by the screw points in the wall.
Left
WIM-Fg-2RiN
Right
WIM-Fd-2RiN
Glass
. Patented glass manufacturing technology that prevents surface corrosion. No specific maintenance requirements
. Permanent protection with a lifetime warranty
Hardware
Wall sections in high shine chrome plate or anodised brushed stainless steel finish:
. Correct out-of-plumb and uneven wall surfaces;
. Secure wall mountings.
Made in France
Easy to maintain
Half-custom and made-to-order

ADLER SAS has designed a number of product ranges for use in showers, interior partitioning or frontages. The extreme miniaturisation of the components and their mechanical performance mean that they all have uses beyond their anticipated purpose. Adler SAS staff work hard to bring your creative designs to life by combining all the techniques at their command.

Why not pay us a visit?
- Go to our Website: www.adler-sa.fr ;
- Or come and see our 350m² showroom at Moussy-le-Neuf, 10 minutes north of Roissy Charles-de-Gaulle airport, outside Paris;
Or contact us :
- by mail : admin1@adler-sa.com ;
- by fax: +33-(0)1 6003 6249 ;
- Par phone : +33-(0)1 60 03 62 00.
We are happy to discuss a rough sketch of your design at length. If you leave it with us, we can contact you with any questions we may have and with practical suggestions for your installation.

1910
Creation of the company
1929
A. ADLER
1976
1978
Patent for ISODOUCHE hinge
Development of the Saloon model
1983
Patent of the selective blocking hinge
1997
Patent for VENUS hinge with ring-type recall system
2006
Patent of the precision automatic-return Capsi hinge

Z.A. La Barogne - 9, Av des 22 Arpents - 77230 Moussy le Neuf - France
Tel.: +33 (0)1.60.03.62.00 - Fax : +33 (0)1.60.03.62.49
E-mail : commercial@adler-sa.com - Site : www.adler-sa.fr
SAS au capital de 2 014 000 euros . RCS Meaux
B562054957