glue for mirror, 140 ml

Elastomer-based glue for mirrors. Does not attack varnish (industrial type), nor silver coating. Good damp resistance. Shear strength: 50kg/cm2, tear off strength: 10 kg/cm2. Temperature resistance beween -15° and +70°.
- Adapted to most supports, clean, dry, dust-free and grease-free.
- Prepare the support.
- Trace the place of the mirror with rule and level.
- Lay down cords every 10 cm at the back of the mirror.
- Place the mirror:
. Porous surfaces (plaster, cement, etc...): press strongly the complete surface with a cloth;
. Smooth surfaces (tiles, wood veneers, etc...): place the mirror, crush the glue and keep away from support; let evaporate the solvents during 2/4 mn; place the mirror and press it strongly with a cloth.
- Steady the mirror with a wedge during 24 hours.
- Cleaning : if necessary, clean the surplus of glue with mineral oil.

- Keep away from heating sources.
- Don't smoke during application.
- Don't breathe in vapors.
- Keep away from children.
- In case of ingestion, consult immediately a doctor and show him the sticker of this packing.