INOVAGLAS canopy - Glass hardware for glass roofs

Set for glass roof in stainless steel including :
- 1 rod 1,5 m. Wall fixing set for the rod on Ø M12 threaded shaft (not supplied)
- 1 rod connector Ø 60 on glass panel, glass connector Ø 60, distance holder for wall fixing with Ø M12 threaded shaft (not supplied).
This glass hardware set permits the installation of glass roof in tempered laminated glass 10 to 16 mm thick (also possible for thicker glass, up to 24 mm, on request).
2 sets are necessary for a glass roof of 1,2m width.
3 sets for 2,2 m width.
4 sets for 3,0 m width.
This articulated system allows to incline glass roof between -12° to +12°.

The metal parts are made of AISI 304 stainless steel. Technically no maintenance is required. If necessary, they can be cleaned with a soft and moist rag. However, the parts installed outside may show signs of rust which are in fact deposits. This oxide dust and other stubborn deposits can be removed with chlorine-free cleaning products. Do not use scouring products which will scratch the surface and provide a more favourable surface for these deposits. See the cleaning and protective products for stainless steel, product family 361. If stainless steel elements are used in coastal areas or near pools, we recommend using polished surfaces and AISI 316 stainless steel (on request with minimum quantity).